ANT-2200 HDMI & DVI H.265 + H264 HD 1080P60 Video Encoder
Key Features
- 1920 x 1080 P60 Max Resolution (Primary 1 x H.264 or H.265 / Secondary 1 x H.264 or H.265)
- H.265 or H.264 Encoder
- HDMI & DVI Inputs & Outputs
- ONVIF discovery, HTTP, RTSP, RTMP and MPEG-TS over UDP Streaming Supported
Product Overview
ANT-2200 dual Stream HDMI & DVI Input H.265 or H.264 HD 1080P60 Video Encoder, capable of up to a maximum 1920 x 1080 at 60 frames per sec encode with single stream streaming (Primary 1 x H.264 or H.265 / Secondary 1 x H.264 or H.265) using an IP LAN ethernet connection. This allows compatibility with all existing and future streaming decoder systems both software and hardware based.
Ideal for encoding Set Top Box outputs , PC or Laptop outputs and streaming for remote view and record.
The new H.265 range has been introduced for customers who need lower bit rate video transfer over LAN or WAN networks – often due to internal network limitations, whilst maintaining high quality video. The key selling point of these new products is their affordability being a low-cost H.265 encoder range – which also have the flexibility to encode in either H.264 or H.265 using the most popular input connection HDMI (and DVI with an adapter).
The inputs are HDMI & DVI. The inputs and outputs are provided to allow for signal bypassing or looping.
Multiple streaming formats are supported such as ONVIF Discovery, RTSP, RTMP,HTTP, MPEG-TS
The encoder is powered via 12V.
AAC, G711 & MP3 audio is supported with embedded audio in HDMI and analogue stereo jack input.
There is no RS232/485/422 2 way serial data communication, motion detection , sensor and alarm I/O, please see the ANT-35000A/H for this feature.
Size: 147 x 100 x 40mm
Weight: 295g
- 1 x HDMI or DVI
- H.265 or H.264 HD Video Encoder
- Up to 1920 x 1080 at 60 frames per sec encode
- Dual streaming using an IP LAN ethernet connection
- HDMI or DVI inputs and outputs allow for signal bypassing or looping
- HTTP, RTSP, RTMP and MPEG-TS over UDP
- Powered via 12V adapter (supplied)
- AAC, G711 and MP3 audio
- Embedded audio in HDMI
| System | Mode | Encoder |
| System | Standards | ONVIF Discovery, RTSP, RTMP,HTTP, MPEG-TS |
| System | Latency | >150mS (system dependant) |
| Video | Compression | H.264 or H.265 |
| Video | Profile | Base, Main or High |
| Video | Frame Rate | 1-60 fps |
| Video | Bit Rate | 16-12 mbps |
| Video | Mode | GOP |
| Video | Bit Rate Control | CBR, VBR |
| Video | Min Resolution | 320 x 180 |
| Video | Max Resolution | 1920 x 1080 |
| Video | Number of Streams | Primary 1 x H.264 or H.265 / Secondary 1 x H.264 or H.265 |
| Video | Inputs | 1 x HDMI (DVI) |
| Video | Input Combinations | Any 1 Input |
| Video | Outputs | 1 x HDMI (DVI) |
| Video | Output Combinations | Any 1 Output |
| Video | On Screen Display | English |
| Audio | Mode | Simplex Stereo |
| Audio | Compression | G.711 + AAC + MP3 |
| Audio | Sample Rate | G711 = 8Khz , AAC= 32/44.1kHz MP3 = 32/44.1kHz |
| Audio | Bit Rate | G711=64kbps, AAC= 24-256kb/s MP3 = 24-256kb/s |
| Audio | Streaming | 1 Way Stereo |
| Audio | Inputs | Analogue Stereo Jack (1vpp) or Embedded Audio |
| Audio | Outputs | Embedded Audio |
| Network | Interface | 10-100 Ethernet RJ45 |
| Network | Protocols | IPv4, TCP, UDP, IGMP(Multicast), DHCP,HTTP, RTP,RTSP, DNS |
| Network | Security | Password Protection |
| Network | Configuration | SDK, WEB |
| Data | Type | N/A |
| Data | Interface | N/A |
| Data | Protocol | N/A |
| Data | Alarm | N/A |
| Data | Sensor | N/A |
| Event | Sources | N/A |
| Event | Actions | N/A |
| Power | Supply | 12v |
| Power | Adapter input volts | AC 110-240v |
| Power | Adapter Output Voltage | 12v DC |
| Power | Consumption | 9.6w |
| Recording | Edge Storage | N/A |
| Temperature | Operating Range | 0 + 50C |
| Physical | Dimensions | 147 x 100 x 40mm |
| Physical | Weight | 295g |
| Physical | Housing | Silver Aluminum |
| General | Certifications | CE , FCC, RoHS |
| General | Software | N/A |
| General | Warranty | 12 Months |
| General | Remote | N/A |
| General | Reset | Web or external |
| Control & Set Up | Set Up | Web Interface API Document |
| Control | API | |
| Upgrade | Firmware Upgrade | |
| In the Box | Contents | Encoder , 12v Power Supply & Lead, HDMI, & Fixing Kit |
| Power Cable/adapter | 1 of either UK/US/EU/China/Aus |
A few of the applications are:
- Encode a PC screen and send to a VMS for monitoring, recording and litigation purposes.
- Encode video from a piece of medical equipment and send to remote consultant to oversee the procedure.
- Encode the output of a set top box for viewing remotely elsewhere
This product is not limited to the markets and applications described.
Product Reviews
There are no reviews yet.