ANT-4000D HDMI, VGA, DVI & Composite H.264 HD 1080P60 Video Decoder
Key Features
- 1920 x 1080 P60 Max Resolution
- H.264 Low Latency 100ms Decoder (use ONLY with ANT-4000e/6000E)
- HDMI, DVI, VGA & Composite Outputs
- TCP/IP, UDP, Multicast, HTTP, one to one proprietary (low latency)
Product Overview
ANT-4000D HDMI, DVI & VGA Output H.264 HD 1080P60 Low Latency Decoder, capable of up to a maximum 1920 x 1080 @ 60fps (frames per second) decode with single stream streaming using an IP LAN ethernet connection. This decoder is designed for use ONLY with the ANT-4000E or ANT-6000E encoder.
The Outputs are HDMI, DVI Composite & VGA Output with low latency of 100mS when used together with the ANT-6000E video Encoder.
Low Latency streaming formats are supported on a one to one proprietary basis with ASNT-4000E/6000E (low latency)
The encoder is powered via 12V.
One way audio is supported with embedded audio out via HDMI or analogue audio out.
The ANT-4000D decoder is only compatible with the ANT-4000E Encoder
- HDMI, DVI Composite & VGA Output
- H.264 Low Latency HD Video Encoder & Decoder Set
- Up to 1920 x 1080 60fps
- Single stream streaming using an IP LAN ethernet connection
- Low Latency – 100ms glass to glass for minimal lag or latency
- Proprietary (low latency) Streams Supported
- Powered via 12V
- One way audio
- Embedded audio in HDMI or analogue
System | Mode | Decoder (Can only Be Used With ANT-4000E) |
System | Standards | Low Latency Proprietry |
System | Latency | 100mS (system dependant) |
Video | Compression | H.264 |
Video | Profile | Baseline |
Video | Frame Rate | 1- 60fps |
Video | Bit Rate | 32k-12 mbps |
Video | Mode | GOP , Rand & Contra Refresh |
Video | Bit Rate Control | CBR, VBR |
Video | Min Resolution | 720 x 480 |
Video | Max Resolution | 1920 x 1080 |
Video | Number of Streams | Primary 1 x H.264 |
Video | Inputs | N/A |
Video | Input Combinations | N/A |
Video | Outputs | 1 x HDMI (DVI) , 1 x Component , 1 x Composite, VGA via dingle |
Video | Output Combinations | Any 1 Output |
Video | On Screen Display | English |
Audio | Mode | Simplex Stereo |
Audio | Compression | 2 Channel PCM, DTS 5.1, AC3 5.1 |
Audio | Sample Rate | 44.1/48kHz |
Audio | Bit Rate | 16bit ADC |
Audio | Streaming | 1 Way Stereo |
Audio | Inputs | Analogue Stereo Jack (1vpp) or Embedded HDMI Audio |
Audio | Outputs | N/A |
Network | Interface | 10-100 Ethernet RJ45 |
Network | Protocols | IPv4, TCP, UDP, IGMP(Multicast), HTTP, DNS |
Network | Security | Password Protection, |
Network | Configuration | SDK, WEB |
Data | Type | |
Data | Interface | |
Data | Protocol | N/A |
Data | Alarm | N/A |
Data | Sensor | N/A |
Event | Sources | N/A |
Event | Actions | N/A |
Power | Supply | 12v |
Power | Adapter input volts | AC 110-240v |
Power | Adapter Output Voltage | 12v DC |
Power | Consumption | 12w |
Recording | Edge Storage | N/A |
Temperature | Operating Range | 0c – 40c |
Physical | Dimensions | 195 x 105 x 44mm |
Physical | Weight | 665g |
Physical | Housing | Black Aluminum |
General | Certifications | CE , FCC, RoHS |
General | Software | N/A |
General | Warranty | 12 Months |
General | Remote | N/A |
General | Reset | Web or external |
Control & Set Up | Set Up | Web Interface API Document |
Control | API | |
Upgrade | Firmware Upgrade | |
In the Box | Contents | Encoder , 12v Power Supply & Lead |
Power Cable/adapter | 1 of either UK/US/EU/China/Aus |
A few of the applications are:
- Encode a broadcast camera for low latency decoding on screen
- Encode a live event – where latency need to be low to avoid audio delay and lag
- Encode the output of a PC and stream to a monitor with no PC attached – jut with the ANT-4000 Encoder.
This product is not limited to the markets and applications described.
Please download or full application catalogue here.